Friday 1 June 2012

Lets go back to Chapter 5!

it has taken quite a while for me to do this chapter, time to devote to it, waiting for devoré paste then fabric, then i decided to buy a proper screen for screen printing as i knew i would use it again and ........ So here goes and by the way Art Van Go don't stock 'Fibre Etch' anymore as they say it was too harsh! so firstly in #1 i used the devoré paste freehand in the top one and with a 'Thermofax' screen on the lower one. both on cotton organdie to create actual holes.

# 2 for some reason i had a whole collection of Whaleys devoré fabric samples so i tested my screen on these and it was quite interesting to see the different results. so top left is cotton/poly jersey, poly/rayon and linen,silk/viscose satin, then next row down from left silk/viscose Georgette, wool/viscose/nylon, poly/viscose and finally poly/cotton. i decided to buy some of the poly/viscose as this had given a really striking effect.

#3 shows my screen in use with a paper template as a mask between the screen and the fabric, the paste has made the fabric transparent and the brightly coloured squares is the plastic table protector. i decided whilst waiting for various deliveries that i would prepare templates and cut outs ready, so i worked with images i had used before for previous chapters.all the pieces are about A4 in size.

#4 once the paste is dry (and it can take quite a while) it is ironed on a gentle setting till it turns brown. sometimes the really brown areas were more difficult to remove than the less brown. i found the best way to remove it was to immediately put it in water and gently remove the burnt fibres which smelt like crumpets! these procedures were carried out in well ventilated areas.

#5 and voila a devoréd image. this one i use torn strips of paper and my cloud images from before (looks a bit Matissey)

#6 i used a paper cut mask of the image below, using both the positive and negative pieces of paper. i think i got slightly carried away with this method and i am certainly smitten with the effect.

my husband said to me 'what on earth do you want to take a picture of that for?'

#8 i used letter cut outs and paper offcuts for this one. it is also the same as image #4 where i had stitched a zig-zag in the top right creating a wonderful texture, might have to try some more of this

#9 i then added colour to a couple of pieces, the above i had used stitch, paper masks and thread masks to create the images. i wanted to colour in isolated areas so i used Koh i nor dyes and painted them on (not sure how fast they are! but it achieved the effect i wanted.

#10 just adding a bit of colour. i am keen to continue with these perhaps dyeing them and over printing but at the moment i feel i have done enough?!



5 comments:

  1. These are wonderful! I love how you have been using text and the compositions you have chosen. The touch of colour looks good, especially in 10.

    ReplyDelete
    Replies
    1. Hi Catherine, thank you! I seem to automatically think of text now. Hope I am not too blinkered.

      Delete
  2. Love your creativity!

    ReplyDelete
  3. These remind me of Matisse and his lovely cut outs.THe touches of color are lovely

    ReplyDelete